We are pleased to announce that we have changed the Horizontal Aluminum Channel moulding to a new more readily available, unified size.

All incoming horizontal channel orders as of December 16, 2024 have automatically been switched from our previous recessed aluminum channel to this new recessed aluminum channel, including the gable machining and all fixing brackets,

• Easier to install on site because of tool free fixing brackets “supports”
• Recessed Aluminum and Flush channel heights are now equal
• Open and closed aluminum ends caps are available.
• Inside and outside cast aluminum corners mean that there is no need to miter the channel
• LED Lighting add on available

Click here for spec page

Recessed Channel

Flush Channel

We are happy to announce that as of October 30, 2024, Artcraft Kitchens will be transitioning to using the SALICE Silentia+ hinges as our standard soft close hinge in both Nickel and Titanium finishes.

Technical Specifications

• Side to side adjustment: -1.5mm to +4.5mm
• Height Adjustment: +-2mm
• Depth Adjustment: +2.8mm
• Protrusion inside cabinet: 7.6mm
• Cup Diameter: 35mm
• Drilling Depth: 13.5mm
• Drilling Distance (K): 4.5mm
• Minimum door thickness: 16mm
• Maximum door thickness: 26mm

Push Latch Hinges

Since the beginning of August 2024, we have been transitioning from reverse sprung, magnetic push latch hinges, and reverse sprung Air hinges, to using the standard soft close hinges with the Blum Tip-On, non magnetic push/pull door opening push latch. Click here for Specification page.

Technical Specifications

• TIP-ON longer version with bumper
• For soft close hinges with springs
• No magnetic catch plate required
• adjustable depth 3.2mm – 6mm
• Output path approx. 38mm
• Drilling: 10mm dia x 76mm depth.

We are happy to announce that we are now offering standard Single and Bi-Fold, pocket door systems. This allows you to open up complete living areas when you need them and conceal them again when they are not in use. No matter whether Single or Bi-Fold door application, the full overlay fronts disappear into a dedicated narrow cabinet, the pocket.

The pocket doors are easy to install, they are shipped in two pieces, a pocket door cabinet and a door assembly. Once the pocket door cabinet is installed, simply mate the door to the pocket hardware using the quick connect fittings. All adjustments are done from the front. The pocket door cabinet is available with a toe kick or with the pocket doors extending right to the floor.

AF017 Replaces AF001 effective September 5, 2024.

What Changed: rail is 2mm wider at 21mm, AF001 was 19mm wide

Reason: Taller doors up to 2438mm are now possible.